Listed below are all our new products as well as completely new sections of the catalgoue. Click on the "More Details" link, picture or the product name to view full information about the product. Click the "Add to cart" link to order it.
New Categories
New Subcategories
Flexcut Carving Tools
Quick-connect Handles and Chisels, Tools Sets, Tool rolls, Pockect Knives. All Hand Crafted using flexcuts long-lasting razor edge.
Pedestal Bases
Pedestal bases available in two different sizes. A 7" square, ideal for portrait presentation, and an 8½" x 6½" suitable for presentation of bi and quad pedal sculpture.
Rubbing Blocks
A range of Rubbing blocks in 20# to 120# grit.
Smith & Masons Sq.
Imperial and metric squares
Carbon Fibre
Plain weave woven roving carbon fibre 450gsm and matching epoxy laminating resin.
Dirty Down Special Effects Sprays
Range of water soluble and translucent Special Effects sprays for use on costumes and props, fabric, wood, ceramics, plaster, resins etc.
Tool Guard VCI
A vapour phase inhibitor for protecting tools and tooling stored in draws, toolboxes and manufacturers packaging against corrosion. A single 35mm diameter pot can protect 2 cubic feet for up to 12 mon...
New Subdivisions
Microcrystalline Wax
Non-toxic, almost odourless wax, very fluid when melted. This wax has a wide variety of uses, being flexible, ductile, cohesive, non-staining. Uses include polishes, modelling, candle making and ble...
No 1 Fishtail Chisel
The Images of Cuts may not be shown to size and are intended as a guide only.
No 4 Fishtail Gouge
The Images of Cuts may not be shown to size and are intended as a guide only.
No 6 Fishtail Gouge
The Images of Cuts may not be shown to size and are intended as a guide only.
No 8 Fishtail Gouge
The Images of Cuts may not be shown to size and are intended as a guide only.
Pneumatic Hammer - 12.5mm
Available in two versions: Light and Medium.Light - Has a hit rate of 8,000/min when running with an air consumption of 80 litres/min.Medium - Has a hit rate of 7,500/min when running at 112 litres/mi...
TCT Chisel - Pneumatic End
Range Of Pneumatic ended chisels.
TCT Claw - Pneumatic End
Pneumatic Claw
TCT Bush - Pneumatic End
Range of Tungsten Carbide Tipped Pneumatic Bushes.
TCT Rounded Chisel - Pneumatic End
Range of TCT Rounded Chisels - Pneumatic End.
Feathers & Wedges
For splitiing larger pieces of stone, supplied as a set of three (2 feathers, 1 Wedge).
Italian Hand Cut Rasps
Hand cut Italian rasps for stone, marble and wood. Not recommended for sandstone or granite. Medium cut with an excellent temper.
Diamond Riffler Set
A set of 10 titanium coated diamond rifflers. Fine cut (180 grit).
Italian Diamond Rifflers
Excellent quality italian diamond rifflers
Diapad® Floppy Squares
Diamond coated squares on a flexible backing. Set of three squares: coarse - 120 grit (black), medium - 200 grit (red) and fine - 400 grit (yellow). 5cm x 5cm.
Wooden Calipers
6¾", 10" and 12" sizes
Wire Modelling Tool Sets
Set of 6 (20cm), Set of 10 (15cm) and Set of 3 (25cm).
Large Detail Wire Tools
Large wire tools with stainless steel ribbon edges.
Earth Colours
Note - Colours may vary between batches.
Combination Modelling Tools
Combination wire and wooden modelling tools. Angle loop and offset loop share the same modelling profile as our "B" series hardwood tools.
MM-230 Silicone Rubber 'Food Safe'
A Food Safe Addition Cured Silicone suitable for making moulds for a variety of applications. Pale Red/pink colour, Shore A 30, Low linear shrinkage 0.08%
Catalyst is mixed at a ratio of 10% by weigh...
Bearing Metal
Very Hardwearing, Durable lead free white metal specifically designed for plain metal bearings, precision moving parts etc. Brinell Hardness @ 100ºC = 12
Thixotropic Paste
100% Thixotropic Polyester Paste *This product is hazardous/flammable and must be sent by a road carrier, please see our delivery charges page for shipping information
DBT Catalyst
The standard catalyst for RTV-101. Available in 5ml (for 1kg of rubber) and 20ml (for 5kg of rubber). *This product is hazardous/flammable and must be sent by a road carrier, please see our delivery c...
Wolfram TCT Cutters
Cone, Cylinder and Taper TCT Cutters for fast cutting and quick removal of material.
Plaster Polymer
Acrylic Plaster Polymer for use with an Alpha Hemi Hydrate plaster such as Basic Alpha, it will produce an extremely hard, less porous casting or modelling material. It can be used as an alternative t...
Italian Bracelet Rasp
medium cut italian bracelet rasp.
Anti-stick Dry Film
Aerosol PTFE dry film lubricant. *This product is hazardous/flammable and must be sent by a road carrier, please see our delivery charges page for shipping information
DR130 Crystal Cast Polyurethane Resin
Water Clear Polyurethane resin for thin section castings (1-5mm)
(Caution: this product is intended for Industrial Use only. Please read technical bulletin and MSDS before using. Proper ventilati...
Addition Cure 13 Silicone Rubber
Very soft Translucent white, dimensionaly stable, two part addition cured silicone rubber with good mechanical resistance. suitable for a variety of applications where precision in reproduction is req...
Addition Cure 33 Silicone Rubber
A medium firm, translucent white, reduced viscosity, two part addition cured silicone ideal for small scale, or detailed castings where high levels of surface accuracy are required. High resistance to...
Addition Cure Thixo Agent
Thixotropic additive for Addition Cure 13 and Addition Cure 33 silicone rubbers. Used in a ratio of 1% (by weight) into each silicone component separately (e.g. 1% into part A and 1% into part B prior...
Self Propelled Tape Measure 2m
A compact self propelled tape measure that goes from 0-2 metres in 1 second! and unrolls completely to double as a 2m rule or strait edge.
TCT Bullnose chisels
New range of TCT Heavy Bull Nose chisels
Firesharp Gouge
Range Of Firesharp Gouges
Polyurethane Mould Rubber ShoreA40
A Polyurethane rubber suitable for a variety of applications. It can be used in conjunction with a suitable release agent for the casting of urethanes, polyesters, epoxy, plasters and concrete. Also...
R5 Wax release agent
Non-silicone wax release agent. Used sparingly at room temperature, gives an excellent coating. Particularly good for silicone from silicone. *This product is hazardous/flammable and must be sent by...
Self Skinning Flexible Polyurethane Foam
A premium two-component soft and flexible foam that is versatile and easy to use. It can be used for a variety of art / crafts, industrial and special effects applications including padding / cushion...
Carbide Burrs
Range of shaped Carbide Burrs
Shaping Wheels
Combination Cutting/shaping Wheels.
Axson F23 Fast-cast Resin
A filled Fastcast polyurethane resin recommended for small/medium castings, model kits, figures etc. Excellent flow properties, white in colour. 6 minutes pot life, cure time of 30 minutes. supplied i...
F31 Polyurethane Resin
A two part Polyurethane fast-cast resin that offers good flexural strength in thin section and hollow castings below 5mm. Suitable for a variety of applications including model aircraft/vehicle kits, ...
Foam Brushes
Foam brushes in 25mm, 50mm, 75mm and 100m widths. Great for streak free finishes and suitable for a variety of paints/oils etc.
New Products
| Records 1 to 50 of 96 | Next | Last |
Mallets & Hammers - Nylon Mallets
Books & Videos - Books: Sculpture Techniques
BUTLER: Casting for Sculptors - New
Code:000-680
Casting for Sculptors
by Vincent Butler
This practical look at casting techniques offers essential guidance to sculptors wishing to convert their clay images into a more permanen...
Price:£14.99 Ex VAT £14.99 Inc VAT
| More Details |
Books & Videos - Books: Sculpture Techniques
DELPECH & FIGUERES: The Mouldmaker's Handbook - New
Code:000-670
The Mouldmaker's Handbook
by Jean-Pierre Delpech & Marc-Andre Figueres.
This highly illustrated and technical book is filled with step-by-step instructions on a broad range of mo...
Price:£25.00 Ex VAT £25.00 Inc VAT
| More Details |
Books & Videos - Books: Sculpture Techniques
PLOWMAN: The Sculptor's Bible - New
Code:000-660
The Sculptor's Bible:
Surface effects and how to achieve them
by John Plowman.
A comprehensive reference with step-by-step instructions on how to create a variety of effects o...
Price:£16.99 Ex VAT £16.99 Inc VAT
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Polyester Pigment: Turquoise Blue 100g - New
Code:406-131
-
Price:£4.70 Ex VAT £5.52 Inc VAT
| More Details |
Studio Equipment & Armatures - Armatures - Aluminium Wire
Round Aluminium Wire 4.76mm (3/16') per kg - New
Code:100-006
Size: 4.76mm (3/16) diameter
approx. 20 metres (60 feet) per kg
Price:£11.00 Ex VAT £12.93 Inc VAT
Discounts available:
5+ : 10%
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Studio Equipment & Armatures - Armatures - Aluminium Wire
Round Aluminium Wire 3.17mm (1/8”) per kg - New
Code:100-005
Size: 3.17mm (1/8") diameter
approx. 50 metres (150 feet) per kg
Price:£11.00 Ex VAT £12.93 Inc VAT
Discounts available:
5+ : 10%
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Casting - Polyester Resin - Polyester Pigments - Opaque
Polyester Pigment: Pastel Blue 500g - New
Code:406-122
-
Price:£10.59 Ex VAT £12.44 Inc VAT
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Polyester Pigment: Pastel Blue 100g - New
Code:406-121
-
Price:£4.56 Ex VAT £5.36 Inc VAT
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Books & Videos - Books: Sculpture Techniques
KALLENBURG: Modeling in Wax for Jewelry and Sculpture - New
Code:000-735
Modeling in Wax for Jewelry and Sculpture 2nd Edition
by Lawrence Kallenburg.
Expands on the original work that first introduced materials, tools and techniques for creating jewe...
Price:£25.99 Ex VAT £25.99 Inc VAT
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Restoration & Finishing - Gilt / Wax Finishes & Patination - Patination & Metal Treatments
Restore Pre-clean 500ml - New
Code:515-515
Restore pre-clean is a powerful water based degreasing concentrate used to remove oil grease and grime from all metal surfaces and is harmless to plastics, rubbers and copper based alloys. It should n...
Price:£23.47 Ex VAT £27.58 Inc VAT
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Polyester Pigment: Bright Green 500g - New
Code:406-112
-
Price:£21.67 Ex VAT £25.46 Inc VAT
| More Details |
Restoration & Finishing - Gilt / Wax Finishes & Patination - Sealers / Varnishes
Lemon Oil 500ml - New
Code:512-824
A near matt, low build up finishing oil with a lemon aroma.
Price:£9.95 Ex VAT £11.69 Inc VAT
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Polyester Pigment: Bright Green 100g - New
Code:406-111
-
Price:£6.96 Ex VAT £8.18 Inc VAT
| More Details |
Restoration & Finishing - Gilt / Wax Finishes & Patination - Sealers / Varnishes
Food Safe Finish Oil 500ml - New
Code:512-082
A clear easy to use oil for use on items that come into contact with foodstuffs. ideal for turned wooden bowls, boards etc. This oil offers good water resistance and is not designed for liquid carryin...
Price:£8.75 Ex VAT £10.28 Inc VAT
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Files & Abrasives - Diamond Abrasives - Diamond Files
Diamond File Square 30cm (12') (handled) - New
Code:307-382
-
Price:£12.73 Ex VAT £14.96 Inc VAT
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Books & Videos - Books: Wood & Stone Carving
NORBURY: Carving Classic Female Faces in wood - New
Code:000-772
Carving Classic Female Faces in Wood
by Ian Norbury
A How-to reference for carvers and sculptors on bringing out the beauty of a female face from a block of wood, using hundreds o...
Price:£12.95 Ex VAT £12.95 Inc VAT
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Polyester Pigment: Sulphur Yellow 500g - New
Code:406-101
-
Price:£17.41 Ex VAT £20.46 Inc VAT
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Polyester Pigment: Sulphur Yellow 100g - New
Code:406-100
-
Price:£6.04 Ex VAT £7.10 Inc VAT
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Polyester Pigment: Chocolate Brown 500g - New
Code:406-096
-
Price:£9.98 Ex VAT £11.73 Inc VAT
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Polyester Pigment: Chocolate Brown 100g - New
Code:406-095
-
Price:£4.41 Ex VAT £5.18 Inc VAT
| More Details |
Modelling Tools - Metal Plaster / Modelling Tools - Italian Plaster Tools:- Spatulas
No.92 Plaster Tool (trowel spatula) - New
Code:200-092
Approx. 20cm (8")
Price:£8.46 Ex VAT £9.94 Inc VAT
| More Details |
Restoration & Finishing - Gold Leaf & Metal Leaf - Metal Leaf
Black Variegated Gold Leaf Loose (1 Book) - New
Code:517-146
Leaf size: 140mm x 140mm
Price:£6.03 Ex VAT £7.09 Inc VAT
Discounts available:
5+ : 5%
20+ : 10%
100+ : 15%
200+ : 20%
| More Details |
Restoration & Finishing - Gold Leaf & Metal Leaf - Metal Leaf
Blue Variegated Gold Leaf loose (1 book) - New
Code:517-144
Leaf size: 140mm x 140mm
Price:£4.64 Ex VAT £5.45 Inc VAT
Discounts available:
5+ : 5%
20+ : 10%
100+ : 15%
200+ : 20%
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Polyester Pigment: Bright Red 500g - New
Code:406-086
-
Price:£33.58 Ex VAT £39.46 Inc VAT
| More Details |
Restoration & Finishing - Gold Leaf & Metal Leaf - Gold & Metal Leaf Sundries
Ready Made Gesso White: 150ml - New
Code:515-033
Ready made gesso in larger 150ml size.
Price:£9.10 Ex VAT £10.69 Inc VAT
| More Details |
Restoration & Finishing - Gold Leaf & Metal Leaf - Metal Leaf
Green Variegated Gold Leaf Loose (1 Book) - New
Code:517-142
Leaf size: 140mm x 140mm
Price:£4.64 Ex VAT £5.45 Inc VAT
Discounts available:
5+ : 5%
20+ : 10%
100+ : 15%
200+ : 20%
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Polyester Pigment: Bright Red 100g - New
Code:406-085
-
Price:£9.53 Ex VAT £11.20 Inc VAT
| More Details |
Casting - Polyurethane Resin - EF002 Self-Skinning Flexible Polyurethane Foam
EF002 Self-Skinning Flexible Polyurethane Foam 6.4kg - New
Code:410-038
- This product is being discontinued and stock is limited, please phone for availability
Price:£79.99 Ex VAT £93.99 Inc VAT
| More Details |
Files & Abrasives - Burs, Cutters & Drills - Cut-Off Wheels
Cutting Wheel 32mm - New
Code:528-508
Large 32mm Carbide cutting wheel for use on Wood, Plastics, Composites, Glassfibre, Carbon Fibre and Stone. Suitable for use with Dremel and Pendant Drills.
Price:£8.58 Ex VAT £10.08 Inc VAT
| More Details |
Casting - Polyester Resin - Polyester Pigments - Opaque
Files & Abrasives - Burs, Cutters & Drills - Polishing Accessories
Felt Polishing Set - New
Code:528-908
Pack of three felt polishing tips, set comprises 1 x 8mm dia. cone. 1 x 7mm dia. cylinder and 1 x 16mm wheel. all with 2.35mm shanks.
Price:£2.33 Ex VAT £2.74 Inc VAT
| More Details |
Files & Abrasives - Burs, Cutters & Drills - Brushes
Steel Brushes 22mm set of 5 - New
Code:528-907
Set of 5 interchangeable Steel brushes, supplied with mandrel (2.35mm shank.
Price:£5.40 Ex VAT £6.35 Inc VAT
| More Details |
Modelling Tools - Clay Modelling Tools - Student Hardwood Tools
T8” Student Hardwood Modelling Tool - New
Code:104-590
.
Price:£1.50 Ex VAT £1.76 Inc VAT
| More Details |
Files & Abrasives - Burs, Cutters & Drills - Sanding Accessories
30mm Flap Wheel 120 grit - New
Code:528-906
30mm Flap Wheel, 3mm shank.
Price:£2.22 Ex VAT £2.61 Inc VAT
| More Details |
Files & Abrasives - Burs, Cutters & Drills - Sanding Accessories
20mm Flap Wheel 120 grit - New
Code:528-905
20mm Flap Wheel, 3mm shank.
Price:£2.22 Ex VAT £2.61 Inc VAT
| More Details |
Books & Videos - Books: Gilding & Restoration
D.V. THOMPSON: The Craftmans Handbook 'Il Libro dell' Arte' - New
Code:000-755
The Craftmans Hanbook
by D. V. Thompson
This is D.V. Thompsons definitive English translation of "Il Libro dell' Arte" a curious guide to methods used in 15th century Florence. ...
Price:£8.95 Ex VAT £8.95 Inc VAT
| More Details |
Books & Videos - Videos & DVDs
DVD: The Art of Sculpting Vol 3 (Men) - New
Code:001-116
The Art of Sculpting Volume 3
Men
Three of a three volume series featuring Philippe Faraut, who for the past twenty years has worked in materials such as wood, stone, bronze and wax. Her...
Price:£45.23 Ex VAT £53.15 Inc VAT
| More Details |
Files & Abrasives - Burs, Cutters & Drills - Sanding Accessories
Sanding Cones 80/150 Refill Pack - New
Code:528-904
Refill pack for Sanding Cones includes 5 x 80 grit and 5 x 150 grit cones.
Price:£7.85 Ex VAT £9.22 Inc VAT
| More Details |
Files & Abrasives - Burs, Cutters & Drills - Sanding Accessories
Sanding Cones 80/150 + Arbor - New
Code:528-903
Sanding cone set includes 5 x 80 grit and 5 x 150 grit cones. The rubber tipped arbor allows quick and secure fit of cones.
Price:£10.24 Ex VAT £12.03 Inc VAT
| More Details |
Files & Abrasives - Burs, Cutters & Drills - Sanding Accessories
Sanding Disc 120/150 refill - New
Code:528-902
Refill pack for Sanding disc arbor, pack includes 5 x 120 grit (coarse) and 150 grit (fine) self adhesive sanding discs.
Price:£2.38 Ex VAT £2.80 Inc VAT
| More Details |
Files & Abrasives - Files, Rasps & Rifflers - Italian Hand Cut Rifflers
No 131 Italian Riffler 16.5cm (6½”) - New
Code:309-131
*This product is temporarily out of stock, and will be dispatched as soon as it becomes available*
Price:£9.70 Ex VAT £11.40 Inc VAT
| More Details |
Files & Abrasives - Burs, Cutters & Drills - Sanding Accessories
Sanding Discs 120/150 + Arbor - New
Code:528-901
Set of 5 x 120 and 5 x 150 Self adhesive sanding discs + Arbor. Sanding disc refill pack also available.
Price:£2.74 Ex VAT £3.22 Inc VAT
| More Details |
Files & Abrasives - Files, Rasps & Rifflers - Italian Hand Cut Rifflers
No 130 Italian Riffler 16.5cm (6½”) - New
Code:309-130
*This product is temporarily out of stock, and will be dispatched as soon as it becomes available*
Price:£12.26 Ex VAT £14.41 Inc VAT
| More Details |
| Records 1 to 50 of 96 | Next | Last | Top |